呼吸器及气瓶检测 Testing Standards and Basis

检测标准依据
GA 124-2013   《正压式消防空气呼吸器》
GB/T  16556-2007   《自给开路式压缩空气呼吸器》
TSG RF001 《气瓶附件安全技术监察规程》
检验周期
空呼器必须在出厂前逐只做出厂检验。正式生产后，产品结构、材料、生产工艺有较大改变时，产品停产一年以上恢复生产时必须进行型式检验。
呼吸器的定期检验周期是一年进行一次，使用年限按产品标准所规定的设计使用寿命执行。
呼吸器在使用过程中，若有严重损伤、发生事故、或对其安全可靠性有怀疑的应提前进行检验。
停用时间超过一年的空气呼吸器，重新使用前应进行检验。
检验项目
■结构   ■标志   ■包装    ■整机气密性   ■动态呼吸阻力
■报警器性能    ■静态压力  ■减压器性能      ■压力表

Testing Standards and Basis

1. GA 124-2013 《Positive Pressure Firefighting Air Respirators》  

2. GB/T 16556-2007 《Self-Contained Open-Circuit Compressed Air Breathing Apparatus》  

3. TSG RF001 《Safety Technical Supervision Regulation for Cylinder Accessories》  

Inspection Cycle

- Air respirators must undergo individual factory inspections before leaving the factory.  

- Upon resuming production after significant changes in product structure, materials, or manufacturing processes, or after production has been halted for more than one year, type testing must be conducted.  

- The periodic inspection cycle for respirators is once a year. The service life shall comply with the design lifespan specified in the product standards.  

- Respirators that have suffered severe damage, been involved in accidents, or whose safety and reliability are in doubt must undergo inspection in advance.  

- Air respirators that have been out of use for more than one year must be inspected before being put back into service.  

Inspection Items  

- Structure  

- Markings  

- Packaging  

- Overall Air Tightness  

- Dynamic Breathing Resistance  

- Alarm Performance  

- Static Pressure  

- Pressure Reducer Performance  

- Pressure Gauge